Here are the servos mounted using those printed brackets and powering the black gear train:
The second gear train was not so easy. For some reason the gears were not in sync and there was too much resistance for the servos to be able to turn them. After some troubleshooting we ended up removing one of the black gears, so there are two gears on the front side which simply don't turn.
Mounting it in our frame:
We stained some lovely pine wood to give a nice frame to our project.
Back
Front
The LED strips are mounted around the top and sides of the box.
We also designed a backplate with a box for our electronics to contain all our components:
No comments:
Post a Comment